Skip to content 
Centurion®
The choice of professionals
Centurion®
Tough high-pressure fire hose
The Centurion is the preferred fire hose for professional firefighting brigades. Crusader Hose has been manufacturing this hose for over 35 years and understands the tough and extreme conditions that firefighters regularly face.
Over the years, Centurion has improved its performance to meet today’s quality demands. The NSW Fire Brigade, multiple brigades of Fire Rescue Victoria, and the Australian Army rely on Centurion.
This Class H hose is woven with spun polyester fibres, which provide excellent abrasion resistance and flexibility. Using Centurion, firefighters carry less weight, which is a real benefit when running up or around buildings. The hose is not only lighter and easier to handle compared to an extruded or rubber fire hose but also easier to roll up and takes up less storage space.
Centurion has Australian Standard AS 2792 and is available in both percolating and non-percolating options.
Technical Data
| Diameter (ID) | 38 mm | 64 mm | 76 mm | 90 mm | 102 mm |
| 1.5" | 2.5" | 3" | 3.5" | 4" | |
| Max. working pressure* | 2100 kPa | 2100 kPa | 1400 kPa | 1400 kPa | 1000 kPa |
| Min. burst pressure | 5250 kPa | 5200 kPa | 3500 kPa | 3500 kPa | 2500 kPa |
| Weight/m | 0.24 kg | 0.37 kg | 0.46 kg | 0.5 kg | 0.56 kg |
| 30 m coil diameter | 0.45 m | 0.50 m | 0.53 m | 0.42 m | 0.50 m |
| AS 2792 approved | ✓ | ✓ | |||
| Part # | HHC038XAA | HHC064XAA | HHC076XAA | HHC090XAA | HHC102XAA |
*Dependent on maximum working pressure of attached couplings if lower.
Large choice of diameters & lengths
Long-lasting & high-quality product
Features
- Excellent abrasion resistance
- High-pressure Class H
- Lighter than extruded hose
- Low-coil size
- Mildew resistant
- Australian Standard AS 2792
- Australian Made
Primary uses
- Fire brigade use
- Hose layer units for brigade support
- Commercial fire protection
- High pressure wash-down
