Fire hose for extreme fires
Sabre™ is a percolating hose which means that water seeps through the fabric jacket. This is achieved by pin pricking the hose so that water can flow through the fabric jacket and offer protection against burning coals. A thin water barrier thus prevents the hose from getting burnt.
Sabre™ is a Class H fire hose with a high working pressure of 2100 kPa. This woven fire hose is made from filament polyester with a synthetic polymer lining. It has Australian Standard AS 2792 approval including a low percolation rate. However, it can be made with higher percolation if required.
- LP – Low Percolation (Standard)
- MP – Medium Percolation
- HP – High Percolation
Sabre™ is fully synthetic and does not perish due to moisture, unlike the original canvas percolating fire hose. It does not require drying after use, although drying does prevent surface mould stains.
Sabre™ is available in diameters of 25mm to 65mm. Usually this hose is supplied in 30m lengths but longer lengths can be made up to 200m.
Like all our fire hose, Sabre™ comes with a 12-month warranty against manufacturing faults. Fully synthetic so no drying is required after use.
- Percolating fire hose
- Working pressure 2100 kPa
- Easy to handle
- No drying required after use
- 12-month warranty
- Percolating fire hose
- Forestry fire fighting
- Bush fire fighting
| Sabre™ | ||||
| Inside Diameter | Mass per Metre | Minimum Burst Pressure | Recommended Working Pressure | 30 m Coil Diameter |
| 25 mm | 0.16 kg | 5250 kPa | 2100 kPa | 0.36 m |
| 38 mm | 0.23 kg | 5250 kPa | 2100 kPa | 0.40 m |
| 51 mm | 0.28 kg | 5250 kPa | 2100 kPa | 0.42 m |
| 64 mm | 0.35 kg | 5250 kPa | 2100 kPa | 0.48 m |
| 65 mm | 0.35 kg | 5250 kPa | 2100 kPa | 0.48 m |